Radio Retrosound "Motor-2DAB" Design "Grand Prix" RDS USB Bluetooth

RETROSOUND "MOTOR-2DAB" DAB+ complete set in "Grand Prix" design with lots of accessories

The "Model MOTOR-2DAB" is a premium model from RetroSound. It is visually identical to the cheaper "MOTOR-1DAB" model and, in addition to its equipment, has a USB input on the back of the device, Bluetooth functions, pre-amplifier outputs and multi-color lighting.

FEATURES
DAB+ digital radio
FM radio with RDS functions
A2DP Bluetooth audio playback for wireless smartphone integration
USB input on the back of the device
AUX input (3.5mm) on the back of the device
Bluetooth hands-free system with external microphone
Pre-amp outputs for external power amplifiers (front / rear)

SCOPE OF DELIVERY
RETROSOUND MOTOR-2DAB radio module with DAB + and FM
RETROSOUND FACE-GRANDPRIX display unit
RETROSOUND RSP-296 ISO installation kit for DIN slot
AMPIRE DAB1 antenna splitter
AMPIRE XUB060 USB built-in socket with 60cm cable
AMPIRE USB4G USB stick with 4GB storage
H-MARK confirmation from TÜV Süd

ANTENNA CONNECTION
Passive rod or telescopic antennas were installed in most classic vehicles. These are also suitable for DAB + radio reception. The set includes a DAB1 antenna splitter. With window antennas or electronically reinforced roof antennas, you have to install a separate DAB + antenna and cannot use the DAB1.

H MARK
Any concerns that your H license plate might be in danger through the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma "and the RetroSound Model Two" including the vehicle-specific panel and control buttons may be installed in oldtimers with an H mark or do not prevent the award of the H mark!

FEATURES
Playback of MP3 and WMA files via the rear USB input
Bluetooth hands-free kit with A2DP audio streaming
Adjustable LCD lighting with 32,000 different colors
DAB+/FM/MW radio receiver with RDS and 30 station presets
Tuner with European even and odd radio frequencies
Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
2 stereo cinch outputs for external amplifiers (front / rear)
3 equalizer programs plus individual bass / treble / fader / balance setting
XBAS loudness function
Non-volatile memory

EXTENSION POSSIBILITIES
USB input (rear of device) up to max.32GB
AUX input (stereo)
2 cinch outputs (stereo) for external amplifiers (front / rear)
Separate switch-on lead for motor antenna and amplifier

TECHNICAL DATA RADIO PART
VHF European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. In steps)
MW frequency range 530-1710 kHz (9 kHz. In steps)
DAB+ reception via SMB antenna input for passive DAB+ antennas

GENERAL DATA
Dimensions of the basic radio unit 101x51x136mm
Power supply 10.5 to 14.4 volts
Maximum power consumption 15 amps
Quiescent current 3.5 mA
Output power 12V, 4 ohms, <1% distortion: 4x15 watts sinus
Speaker impedance 4-8 ohms
Cinch outputs 6 channel 2.85 volts for external amplifiers (front / rear)
Input sensitivity AUX1> 300 mV / 6 kOhm
Input sensitivity AUX2> 300 mV / 6 kOhm

Installation and Owners Manual

To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure please contact us via email system so we can advise before you make your purchase.