Alpine S2-A60M Mono Class D Amplifier

€329.00
Tax included
Ref: LKS2A60M

The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat. 

Quantity
Last items in stock

help_outlineAsk about product
Alpine S2-A60M Mono Class D Amplifier

Alpine S2-A60M Mono Class D Amplifier

I accept privacy policy rules  

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. 

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

Features
Class-D Amplification (Digital)
Channel Design: Mono Channel
Side panel controls
Thermal Management Control
Top Mounted LED Power/Status Indicator
Speaker Level Input
3 turn-on modes (DC HI, Remote HI, Remote LO)
Input Channel Selector Switch for Subwoofer
Crossover: Variable Low-pass Filter (LPF)
Adjustable Gain Control
Bass EQ
Remote Bass Control (RUX-KNOB2) Ready

Specifications
Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 600W
Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600W
Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330W

Sound Tuning
Crossover: Variable LPF: 50-400Hz (-24dB/oct)
Bass EQ (+12dB)

General
Power Requirements: 14.4 V.DC (9 - 16 V allowable)
Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
High Level Input with automatic power on
Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
THD+N (@ 10W into 4 Ohms): <0.03%
Damping Factor: >1000
Weight: 2.2kg

Dimensions
Heat Sink (WxHxD) mm: 220 x 57 x 210

OM_S2-A120M_S2-A60M_EN.pdf

To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure please contact us via email system so we can advise before you make your purchase.

LKS2A60M