• New

BLAM WAVE 10 Marine Subwoofer 10"


BLAM WAVE 10 Marine Subwoofer 10"

Last items in stock

help_outlineAsk about product
BLAM WAVE 10 Marine Subwoofer 10"

BLAM WAVE 10 Marine Subwoofer 10"

I accept privacy policy rules  

10" Subwoofer BLAM WAVE 10

The WAVE series is BLAM's marine series, where the products are specially designed to withstand a rougher environment such in marine watercraft and off-road vehicle audio systems.

WAVE 10 is a 10" marine bass element with a chassis in ABS composite, polypropylene membrane and butyl rubber suspension, as well as a solid protective grid.

Chassis in ABS composite
Butyl rubber suspension
Polypropylene membrane
Conex spider
50mm voice coil
Developed in France
Thiele/Small parameters
Sensitivity (SPL): 87 dB (2.83V/1m) / 90 dB (1W/1m)
DC resistance (Re): 3.4 Ohm
Mechanical Q factor (Qms): 5.85
Electrical Q factor (Qes): 0.96
Total Q factor (Qts): 0.83
Resonance frequency (Fs): 69.58 Hz
Equivalent air volume (Vas): 8.62 litres
Moving mass (Mms): 14.03 grams
Force factor (B*l): 4.66 Tm
Cone area (Sd): 128.68 cm2
Max linear excursion (Xmax): 1.9 mm

In the box
BLAM WAVE 10 marine subwoofer in black
Mounting screws
User manual

To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure please contact us via email system so we can advise before you make your purchase.