Radio Retrosound "Motor-1DAB" Design "Europa" RDS USB

RETROSOUND "MOTOR-1DAB" DAB+ complete set in "Europe" design with lots of accessories

The "Model MOTOR-1DAB" is the entry-level model in "Grand Prix" design with DAB + digital radio from RetroSound.

FEATURES
DAB+ digital radio
FM radio with RDS functions
AUX input (3.5mm) on the back of the device

SCOPE OF DELIVERY
RETROSOUND MOTOR-1DAB radio module with DAB+ and FM
RETROSOUND FACE-GRANDPRIX display unit
RETROSOUND RSP-296 ISO installation kit for DIN slot
DAB1 antenna splitter
H-MARK confirmation from TÜV Süd

OPTIONAL ACCESSORIES
BTR200 - AMPIRE Bluetooth receiver for the 3.5mm AUX input
You need the BTR200 receiver so that you can also connect your smartphone to the car radio via Bluetooth. This is plugged into the AUX input on the back of the device. The music is then selected via the smartphone.

ANTENNA CONNECTION
Passive rod or telescopic antennas were installed in most classic vehicles. These are also suitable for DAB+ radio reception. The set includes a DAB1 antenna splitter. With window antennas or electronically reinforced roof antennas, you have to install a separate DAB+ antenna and cannot use the DAB1.

H MARK
Any concerns that your H license plate might be in danger through the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma "and the RetroSound Model Two" including the vehicle-specific panel and control buttons may be installed in oldtimers with an H mark or do not prevent the award of the H mark!

FEATURES
Warm white LCD lighting
DAB+ / FM / MW radio receiver with RDS and 30 station presets
Tuner with European even and odd radio frequencies
Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
3 equalizer programs plus individual bass / treble / fader / balance setting
XBAS loudness function

EXTENSION POSSIBILITIES
AUX input (stereo)
Separate switch-on lead for motor antenna and amplifier

TECHNICAL DATA RADIO PART
VHF European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. In steps)
MW frequency range 530-1710 kHz (9 kHz. In steps)
DAB+ reception via SMB antenna input for passive DAB + antennas

GENERAL DATA
Dimensions of the basic radio unit 101x51x136mm
Power supply 10.5 to 14.4 volts
Maximum power consumption 15 amps
Quiescent current 3.5 mA
Output power 12V, 4 ohms, <1% distortion: 4x15 watts sinus
Speaker impedance 4-8 ohms
Input sensitivity AUX1> 300 mV / 6 kOhm

Installation and Owners Manual

To ensure compatibility, we recommend that the parts pictured in our listing are compared to the actual parts in your vehicle before you make your purchase. If still unsure please contact us via email system so we can advise before you make your purchase.